Subject: [LinuxFailSafe] shared SCSI devices

[Robert Meiners]

--=-/MTHutVPAMRFJYuFlH+h
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable

Hello,

we have already installed Failsafe in many different
configuratins and these are our experinces.

With a singel initiatore bus system, you should
use the 'cluster enabled' ICP Controllers, these
work also fine with the IBM RAID.
But you need special software and adapted failsafe
mount-scripts! (we  have)

The other variation is to use an autarchic Raid-Arry.
A fine solution is offered by Compaq, the CL380 (we also used)
or the new DL380 Packeged Cluster.
Or a nice third party device are the IFT-RAIDs.
The have systems with 2 host channels in SCSI and,
and this interessting if you have a smaller budget, also in IDE!
In Germany they are availible at starline.de,=20
ask Mr. a.freisen@starline.de, he is well known in Cluster systems.

And last but not least a FibreChannel system is all times the finest,
and believe it or not, IFT deliveres also IDE-2-FIBRE systems!

I hope i could help you.

By

Robert

--=20
* Dipl.-Inform. R. Meiners <meiners@gonicus.de> Consulting
* Gonicus GmbH * Moehnestr. 11-17 * D-59755 Arnsberg
* Tel.: +49 2932 916-0 * Fax.: +49 2932 916-255
* http://www.gonicus.de

--=-/MTHutVPAMRFJYuFlH+h
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: Dies ist ein digital signierter Nachrichtenteil

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: Weitere Infos: siehe http://www.gnupg.org

iD8DBQA9LTM9wozIcziS6EIRAjIjAJ95KTYALrnM9xndzmDxjtEWISUrbACePtCF
FGe2ZIY3Hlrpke01anWui/Y=
=/S4n
-----END PGP SIGNATURE-----

--=-/MTHutVPAMRFJYuFlH+h--