[Linux-HA] onboard NIC looses IP on reboot
Rudi at SoftDux.com
Wed Jul 25 04:00:39 MDT 2007
Yes, there is a config for the other NIC as well, but since the other
NIC doesn't give problems I didn't think it matters. Changing the way
YaST handles / manages the NIC's didn't make a difference, I have
already tried that
ron:~ # cat /etc/sysconfig/network/ifcfg-eth-id-00\:17\:9a\:3a\:64\:cd
NAME='D-Link DGE-528T Gigabit Ethernet Adapter'
> st NIC (192.168.0.6). You sure there exists another config file for
> the new NIC (192.168.100.2) ?
> In which way did you tell Yast to handle the NICs? Via that new
> network manager thingy or via the old ifup/ifdown way? Maybe trying
> the other one helps... (?)
> greets Lars.
> Rudi Ahlers wrote:
>> Hi all
>> I wonder if someone can help me. I have a Gigabyte 8S661FXMP-RZ PIV
>> mobo with 10/100 onboard NIC (Sis900), which has been running happily
>> for more than 2 years on 192.168.0.6 on Suse 9.3. I recently upgraded
>> the machine to Suse 10.2 (fresh install 1 month ago), and it's been
>> working fine since yesterday. So, the NIC & the mobo works fine.
>> Now, I added a new NIC yesterday for heartbeat, and configured it on
>> 192.168.100.2 (It's a D-Link DGE-528T)
>> The problem is, the moment I reboot the server, the onboard NIC
>> looses it's IP address, yet the PCI one doesn't.
>> scanpci outpout:
>> pci bus 0x0000 cardnum 0x04 function 0x00: vendor 0x1039 device 0x0900
>> Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet
>> pci bus 0x0000 cardnum 0x09 function 0x00: vendor 0x1186 device 0x4300
>> D-Link System Inc DGE-528T Gigabit Ethernet Adapter
>> 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
>> PCI Fast Ethernet (rev 90)
>> 00:09.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit
>> Ethernet Adapter (rev 10)
>> I can see that the IP address is configured for the NIC, both when I
>> use YaST's Network Devices control panel & cat the config file via SSH:
>> ron:~ # cat /etc/sysconfig/network/ifcfg-eth-id-00\:0f\:ea\:c3\:3c\:55
>> NAME='Giga-byte SiS900 PCI Fast Ethernet'
>> Any suggestions?
More information about the Linux-HA