[Linux-HA] heartbeat + IPaddr Resource is stopped
MIQUET Pascal
pascal.miquet at wanadoo.fr
Thu Dec 14 07:22:16 MST 2006
Are you shure that the node name is correct ?
And that you IP address is not in use on your LAN ?
First you may try to start HB on your master node.
Do you use the ping or ping_group directive ? I would suggest to do not
use it.
Pascal
Le jeudi 14 décembre 2006 à 08:17 -0600, prashant n a écrit :
> Hi,
>
> I tried all these combinations including defining nodes in 2 dirrerent lines, disabling serial connection etc.
> But still the same problem IPaddr Resource is stopped
>
> Regards
> Prashant
>
> On Thu, 14 Dec 2006 08:52:41 +0100, MIQUET Pascal <pascal.miquet at wanadoo.fr> wrote:
> > I'd suggest to set the node definition on 2 lines.
> >
> > node drdb1.mobiapps.com # List our cluster members
> > node drdb2.mobiapps.com # List our cluster members
> >
> > And concerning the HAResources set IPAdrr
> > drdb1.mobiapps.com IPaddr2::172.16.1.50/24/eth1/172.16.1.255
> > drbddisk::r0 Filesystem::/dev/drbd0::/data::ext3 apache
> >
> > My system on RH EL 3 and CentOS 3 using HA 1.2.3 using only eth0 and
> > eth1 for Heartbeat, I mean i do not use the serial connection to set
> > Heartbeat.
> > I also need to remove the ping or ping_group directive as it fails and
> > then stop the service on the node.
> >
> > HTH
> > Regards
> > Pascal
> >
> > Le mercredi 13 décembre 2006 à 22:23 -0600, prashant n a écrit :
> >> hi,
> >>
> >> I have a 2 node HA test setup in which i have the following
> > configuration :
> >> O.S : CentOS 4.4 x86_64
> >> drbd : kernel-module-drbd-2.6.9-42.EL-0.7.21-1.c4 & drbd-0.7.21-1.c4
> >> heartbeat : heartbeat-2.0.7-1.c4
> >> 2 NICs :
> >> on node1 eth0=10.1.1.46, eth1=172.16.1.155
> >> on node2 eth0=10.1.1.56, eth1=172.16.1.56
> >> 1 Serial-Port-Cable and 1 RJ45 Cross-Over-Cable(connected to both nodes
> > on eth0) is connecting both the nodes
> >>
> >> All the above was installed from the official rpms from CentOS releases.
> >> I have configured the drbd successfully and it is running properly
> >> When I try to do the sanity check as : sh
> > /usr/lib64/heartbeat/BasicSanityCheck , I get the following output :
> >>
> > ----------------------------------------------------------------------------------------------
> >> Using interface: eth1
> >> Starting base64 and md5 algorithm tests
> >> base64 and md5 algorithm tests succeeded.
> >> Starting heartbeat
> >> Starting High-Availability services:
> >> 2006/12/13_22:33:07 INFO: IPaddr Resource is stopped
> >> [ OK ]
> >> Reloading heartbeat
> >> Reloading heartbeat
> >> Stopping heartbeat
> >> Stopping High-Availability services:
> >> [ OK ]
> >> Checking STONITH basic sanity.
> >> Performing apphbd success case tests
> >> Performing apphbd failure case tests
> >> Starting IPC tests
> >> Starting LRM tests
> >> Starting heartbeat
> >> Starting High-Availability services:
> >> 2006/12/13_22:34:25 INFO: IPaddr Resource is stopped
> >> [ OK ]
> >> starting STONITH Daemon tests
> >> STONITH Daemon tests passed.
> >> Stopping heartbeat
> >> Stopping High-Availability services:
> >> [ OK ]
> >> Starting CRM tests
> >> CRM tests passed.
> >> Starting heartbeat
> >> Starting High-Availability services:
> >> [ OK ]
> >> starting SNMP Agent tests
> >> SNMP Agent tests failed.
> >> Stopping heartbeat
> >> Stopping High-Availability services:
> >> [ OK ]
> >> 1 errors. Log file is stored in /tmp/linux-ha.testlog
> >>
> > ----------------------------------------------------------------------------------------------
> >> My /etc/ha.d/ha.cf is
> >>
> > ----------------------------------------------------------------------------------------
> >> logfacility local0 # syslog facility
> >> debugfile /var/log/ha-debug # ha-debug logs
> >> logfile /var/log/ha-log # ha info logs
> >> keepalive 1 # Send one
> > heartbeat each second
> >> warntime 2 # late HB
> >> deadtime 10 # Declare nodes
> > dead after 10 seconds
> >> node drdb1.mobiapps.com drdb2.mobiapps.com # List our
> > cluster members
> >> ping 172.16.1.1 # Ping our
> > router to monitor ethernet connectivity
> >> bcast eth0 eth1 # Broadcast
> > heartbeats on eth0 and eth1 interfaces
> >> baud 19200 # baud rate
> >> serial /dev/ttyS0 # HB serial link
> >> auto_failback no # Don't fail back to
> > drbd1.mobiapps.com automatically
> >>
> > ---------------------------------------------------------------------------------------------------
> >> My /etc/ha.d/haresources is
> >>
> > ------------------------------------------------------------------------------------------------------
> >> drdb1.mobiapps.com IPaddr2::172.16.1.50 drbddisk::r0
> > Filesystem::/dev/drbd0::/data::ext3 apache
> >>
> > -----------------------------------------------------------------------------------------------------
> >> If any one wants the complete log I can attach the same.
> >>
> >> Please guide me howto resolve this IPaddr Resource is stopped issue
> >>
> >> Thanks & Regards
> >> Prashant
> >>
> >>
> >> -----------------------------------------------------------
> >> Sign up and get your 30GB webmail at www.30gigs.com now!
> >> _______________________________________________
> >> Linux-HA mailing list
> >> Linux-HA at lists.linux-ha.org
> >> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> >> See also: http://linux-ha.org/ReportingProblems
> >>
> >
> > _______________________________________________
> > Linux-HA mailing list
> > Linux-HA at lists.linux-ha.org
> > http://lists.linux-ha.org/mailman/listinfo/linux-ha
> > See also: http://linux-ha.org/ReportingProblems
>
> -----------------------------------------------------------
> Sign up and get your 30GB webmail at www.30gigs.com now!
> _______________________________________________
> Linux-HA mailing list
> Linux-HA at lists.linux-ha.org
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems
>
More information about the Linux-HA
mailing list