[Linux-HA] Normal failover time

[Carlos Mota]

Hello,

I've set up a simple cluster in Linux (RH) which only implements a new IP address. It takes about 90 secons to failover manually. Shouldn't it be faster? What's the problem?

Here are the config files:

ha.cf - node 1 and node 2
=========================
logfacility     local0
keepalive 1
deadtime 3
warntime 3
initdead 20
udpport 694
baud    19200
serial  /dev/ttyS0      # Linux
bcast   eth0            # Linux
auto_failback off
node prxnms1n
node prxnms2n
ping 10.100.22.1
respawn hacluster /usr/lib/heartbeat/ipfail

haresources - node 1 and node 2
===============================
prxnms1n 10.100.22.200

> Thanks
>
> Carlos Mota
>

------------------------------------------
This message may contain confidential information or privileged material,
and is intended only for the individual(s) named. If you are not in the
named addressee you should not disseminate, distribute or copy this e-mail.
Please notify the sender immediately by e-mail if you have received this
e-mail by mistake and delete this e-mail from your system.

E-mail transmission cannot be guaranteed to be secure or error-free as
information could be intercepted, corrupted, lost, destroyed, arrive late
or incomplete, or contain viruses. The sender therefore does not accept
liability for any errors or omissions in the contents of this message
which arise as a result of e-mail transmission. If verification is
required please request a hard-copy version.

Vodafone (Portugal)